This listing is to provide you with a tool that you can use to
select up to three (3) frequency choices for your WPRC Frequency
Coordination Application (WPRC-100).
Please remember when checking
your selected frequency, to also check the frequencies immediately
above and below your chosen frequency, and to follow the recomendations
in the "WPRC Repeater
Coordination Policies"
Please note that this is your
tool. You should not send it with your application.
For your reference, below is a list of all
valid 2M repeater output frequencies. The inputs are listed above
each respective segment.
All 145 MHz outputs which follow use a -600 kHz split)
( ) 145.11
( ) 145.13
( ) 145.15
( ) 145.17
( ) 145.19
( ) 145.21
( ) 145.23
( ) 145.25
( ) 145.27
( ) 145.29
( ) 145.31
( ) 145.33
( ) 145.35
( ) 145.37
( ) 145.39
( ) 145.41
( ) 145.43
( ) 145.45
( ) 145.47
( ) 145.49
---(inputs as listed)
( ) 146.415 (+1 MHz split)
( ) 146.430 (+1 MHz split)
( ) 146.445 (+1 MHz split)
( ) 146.460 (+1 MHz split)
( ) 146.475 (+1 MHz split)
( ) 146.490 (+1 MHz split)
( ) 146.505 (+1 MHz split)
---(All 146 MHz outputs below use a -600 kHz split)
( ) 146.610
( ) 146.625
( ) 146.640
( ) 146.655
( ) 146.670
( ) 146.685
( ) 146.700
( ) 146.715
( ) 146.730
( ) 146.745
( ) 146.760
( ) 146.775
( ) 146.790
( ) 146.805
( ) 146.820
( ) 146.835
( ) 146.850
( ) 146.865
( ) 146.880
( ) 146.895
( ) 146.910
( ) 146.925
( ) 146.940
( ) 146.955
( ) 146.970
( ) 146.985
---(All 147 MHz outputs use a +600 kHz split)
( ) 147.000
( ) 147.015
( ) 147.030
( ) 147.045
( ) 147.060
( ) 147.075
( ) 147.090
( ) 147.105
( ) 147.120
( ) 147.135
( ) 147.150
( ) 147.165
( ) 147.180
( ) 147.195
( ) 147.210
( ) 147.225
( ) 147.240
( ) 147.255
( ) 147.270
( ) 147.285
( ) 147.300
( ) 147.315
( ) 147.330
( ) 147.345
( ) 147.360
( ) 147.375
( ) 147.390
---end
Edited: October 14, 2009